Uwell vape pod caliburn Nunchaku Amulet Crown IV review

I received a Uwell Nunchaku 2 the purposes of this review.

 

Nunchaku 2 colors:

 

– blue

– Black

– money

– iridescent

 

Specification:

 

 

– Size: 29.9 mm x 100 mm

– Material: stainless steel, polycarbonate

– Battery Type: 18650/20700/21700 individual cells (not included)

– Power Range: 5-100W

– Operating mode: the power mode, the TCR mode, fashion Mech

– Resistance range: 0.1-3ohm (VW); 0.1-1ohm (TC)

– Temperature: 100 ℃ -315 ℃ / 200 ℉ ℉ -600

 

features:

 

  1. powered by a single battery output 18650/20700/21700 100W max
  2. Various operating modes: power mode, mode mode TCR and Mech
  3. PCBA is dustproof and moisture-proof, to effectively protect the central unit of the device
  4. The chip has features multiple protection circuits to provide stability, security and reliable performance
  5. Sensor 6-axis motion of the new operating experience
  6. 5V / 2A fast charge, reducing the cost of the time
  7. Available in 4 colors: silver, blue, black, iridescent

 

 

In the frame:

 

– Well nunchaku 2 Mod

– 18650 Arm

– Micro USB Cable

– User’s Guide

 

caliburn uwell

is an improved version of the previous model nunchaku. This device comes in 4 different colors and designs of this mod is the same as before. Personally, I really like the design of this mod and nunchaku is very convenient to use if you like the tube mods.

mod build quality is very good and I felt very good in the hand. You can see some details about the Ministry of Defense, you can see the “nunchaku Well 2” and under the battery cover, you can see the “nunchaku Well 2” and its website. This mod works 5-100w mods and mod work with the media. Nunchaku 2 supports 21,700, 20,700 and 18,650 batteries were really good.

 

From the top you can see the model and cable connection is fine here, I have no problem with my atomizers and pin here is gold plated and spring. This mod, can be used up to 26 mm diameter in Crown vape

without a good projection for me.

Sub mod have a battery cover and the battery cover, you can see some details that helps when you want to open the lid of the mod. Put here is really good. If the battery cover is removed, you can see the orientation of the recorded battery. As I said, this device supports 21,700, 20,700 and 18,650 batteries. Generally, you will receive an adapter to 18650 if dont’t 21,700 batteries. Personally, I really want to use the 21700 battery and think it’s great that this device compatible with battery 21700. On the back of the Caliburn Pod

, you can see the USB port that can be used to charge the battery, and this mod support quick charge, but as usual, I suggest you use an external charger.

Before the mod, you can see the button on the screen and fire.

fire button on this unit stand out, very clicky and details that really count much in it. As the shutter button works very well. The screen of this device is small, but the brightness of the screen is very good and you can see the information on the screen without any problems.

As you can see, we have no buttons and less, but we have a sensor to be used here.

In addition, the board of this device is dust-proof and moisture proof is really good.

To activate it you must click 5 times on the fire button to turn off the mod you have to do the same.

When the screen is turned on, you can see:

 

– W

– process

– coil resistance

– The battery indicator

 

To enter the menu you must click 3 times on the shutter button and the enter the menu, you will see:

 

 

– Supply Mode

– TCR Fashion

– Mech Fashion

– Factory settings

 

If you want to customize your power, you need to click 3 times on the shutter button, then you must select a power mode and after that you have to tilt the mod right to increase or left to lower watts of power. In the same way, when you enter the menu by pressing the shutter button 3 times mod must lean left or right to scroll. Uwell Crown IV

works very well and once when you are used, you can customize almost everything easy and hassle.

 

Protection on these devices:

 

– Short-circuit protection

– Low-voltage protection

– Temperature Protection

– the reverse battery protection

 

 

 

How do these devices work and my thoughts:

 

Amulet Vape is an improved version of the previous model. The design of this device is similar and I like it because this mod is very comfortable to use and I really like the tube mods. good building quality mod, feels like a very dense morning. This mod, can be used up to 26 mm diameter no more outgoing atomizers for me. the previous model is only compatible with the 18650 batteries, but they changed it and is compatible with a larger battery that is really good. Because of this mod is compatible with a larger battery is slightly larger than the previous bite. shutter button is very nice and convenient to use and remember than previous models E every day, I have no problem with the shutter button, I belive that also will be very good in the future. The sensors have here works very well and you really get used quickly and once you do, you will be able to customize quickly and smoothly. This mod mod is very simple to use than many people would like. Furthermore, it was very good that this board mod dust and moisture resistant. So far, this model works well and remember how long I was using his model before belive that I use for a long time without any problems.

If you like the previous version, but you want the version that you can not mod 21700 to make a mistake with this one, and in this case certainly will advise you on this.

 

 

 

Drawbacks:

 

– No buttons plus and minus, someone does not like, I personally really sensor because it works very well and once you get used to it not have a problem

 

Pro:

 

– The build quality is good

– atomizers diameter 26 mm

– good fire button

– sensors work well

– Easy to use

– comfortable to use

– Topics well

– Compatible with 21,700, 20,700, 18,650 batteries

– good screen brightness

– The board is dustproof and moisture-proof

– Given the quality of the painting of the previous model, I can tell a good painting

– No scrap when shaken mod

 

 

 

 

sourcemore thanks

You can buy the kit here : Uwell pod

 

Comment about IJOY Captain Mercury JUPITER Pod Shogun Diamond

I received a pod IJOY Mercury AI system for the purposes of this review.

IJOY pod system is available in several colors:

– Red
– Black
– Blue

Specification:

– Size: 28 x 13 x 90.5mm
– Liquid Capacity E: 2ml
– Battery capacity: 450mAh
– Resistance: 1.6ohm
– Watt: 15W (max)
– Charging time: 45 minutes
– Charging port: Micro USB

features:

• Chipset IWEPAL to ensure a stable output
• Some protection for high performance
• The indicator light for easy operation
• Capacity 450mAh battery
• Liquid capacity
• It can fill a different flavor of e juice

In the box:

– The AI ​​Module
– longe
– USB cable
– Manual

IJOY JUPITER Pod ment system for use with a liquid of high e nicotine, nic molten salt.

Monodosis system which is a very small device, I can say that this is one of the smallest I have ever tasted. The device is also very light, suitable for I sheath system. You can buy this device in three different colors, I received a black and looks good in my opinion. The colors are very beautiful, it has a matte finish and a great feeling in the hand. As I said, it is very light, but still seems to have a very good quality and is aluminum. In this package, you will get a nice bead carry the device around your neck if you will, so I believe someone like this together, it was very nice to see that in the package.

Let’s start from the cartridge when you receive are instruments to the bottom of the tape cartridge to prevent this device to turn on and protection of the funnel, which is good. Good canal, was comfortable and I can not say anything bad about the funnel, for me it was good. Cartridge is a beautiful place and no magnets,

but still very nice and there is no possibility that the cartridge may fall. In the slot device you can see two IJOY Shogun and make the cartridge in a very tight spot.

The bottom of the cartridge does not have a connection, there is also a place where the cartridge can be filled with fluid and had holes for the air flow. Therefore, the bottom is a rubber stopper is needed to fill the cartridge. Liquid holes is ideal for pod system and will not have problems as possible, I use bottled gorilla and I have no problem with it. It is very easy to fill the cartridge simply remove the rubber stopper with liquid fill and mail the cover. capacity of 2 ml of the cartridge, which is good and most of the sheath system has a capacity of 2 ml, if you use the NIC salt should be in this device, which can easily last all day because you can not get high-nic liquid vape chain. Air hole size is 1.5mm x flow 2.5 mm below. You can expect condensation to form, but this is normal, you can not be cleaned once a day and you’ll be fine. No resistance 1.6ohm coil cartridge.
This unit has a beautiful color and feels good in the hand, the device can see AI recorded and that’s basically all, this device is very clean. From the top of the device there is a slot into which the cartridge is placed and you can see the connection of the spring gold here. From the bottom of the camera, you can see the USB port and you can see the two screws. In the device, you can see two of the air outlet holes salt, one on one side and the other hole on the other side, through the air hole is a hole in the cartridge and then in coils.
On the device, you can also see the LEDs. No it is no shutter button is automatically activated when the pod vaporizer AI, Vape whenever the lights turn green. When the cartridge is removed or when placed in the slot, the green light flashes three times LED lights devive, if there is a short circuit.
This device has a good built-in battery with 450 mAh capacity, the capacity of which is for the pod system is very low. When light empty battery flashes 10 times, and the camera turns off when the device is in the charger, you will see a red light when the battery is fully charged, you will see a green light. Charging time for this unit is 45 minutes.

Use products:

First, I would like to say once again that it is very compact, suitable for spray stealth, which is easy to use and can be hand wherever you go, you can use the packaging of the cable and jack. The battery capacity is good in my opinion and I think a battery that will last all day with a salt medium Vaper way nic. Devices for good air flow, the air flow entering through the two holes in the device, and then switch to the coil through (hole size of 1, 5 mm x 2.5 mm) cartridge hole . Not very interesting tight but loose, something in between, you can have a decent dl mtl aerosol can spray, but very, very tight, almost impossible, which is very good for MTL device.

He hits the throat is very good, very good steam IJOY Diamond for the sheath system. Personally, I like MTL tight tie, but I can say that the air flow here should be good for most mtl vapers. I’ve only found two drawbacks for this camera, I want a more cartridge in the package and want to see the battery indicator. Basically, this unit works as it should, so I can not complain and would recommend.

Drawbacks:

– Only one cartridge in the package, there must be two

– The battery indicator will be fun

 

Pro:

 

– a small device

– It works well

– 450mAh battery

– Good build quality

– good color quality

– Traka

– It’s easy to fill the cartridge

 

You can buy it here: IJOY Captain

 

On the IJOY Captain Mercury Jupiter Shogun Diamond Bae review

Captain IJOY come in several different colors:

– Black
– H.H
– Rainbow
– Gun Metal
– blue
– Red
– Purple
– Green
– Gold
– White

Specification:

Saber 100 MOD

– Size: 97 (height) x 29 mm (diameter)
– Maximum power: 100W
– Output mode: VW
– Resistance Range: 0.05-3.0ohm
– Battery Type:
20700 battery (DC discharge = 40A, inclusive),
18650 battery adapter (continuous discharge current = 25A, not included)
Compatibility tank – There is nothing wrong with the tank 25 mm
– Topic: About 510

Vape IJOY shogun

– Diameter: 25 mm
– Height: 56.5mm
– Capacity: 5.5 ml (with ordinary glass tube 4 ml) (standard) / 2 ml (TPD Version)
– coil: coil 0.15ohm DM-Mesh (40-90W, pre-installed)
DM DM-Coil 0.15ohm (40-90W)
– 810 advanced resin drips Drip Tip
– Subject: 510

features:

Very compact, portable pen style
CNC carved with attractive colors
Compatible with single battery 20700/18650
The maximum output of 100W with advanced chip IWEPAL
custom buttons fire pentagonal
Bright and large screen
custom single-user mode
subohm beautiful diamond tank with an elegant design
capscrew 180 ° fast charge
New DM-mesh coil and coil diamond-DM DM

 

In the frame:

– IJOY SABER 100 (100W)
– 20,700 IJOY battery
– 18650 Adapter
– DIAMOND TANK SUBOHM
– DM-Mesh 0.15ohm coil (40-90W I installed)
– 0.15ohm coil-DM DM (40-90W)
– Replacement Glass
– tool kit
– USB Cable
– Guarantee card

IJOY Diamond Bae come in several different colors,

I accept the color of stainless steel. diameter diamond glass sub-ohm is 25 mm, the size of the deposit is 56.5mm. Build quality is good and is very similar to a smaller version of the tank, of course, was larger and different things.
You can see the statues in the atomizer, at the bottom you can see engraved “Designed by IJOY” and “Diamonds” reservoir on the upper deck, you can see engraved “IJOY” and diamond engraving. Under the previous limit, you can see some of the details and the details of the same diamond ring is to adjust the flow of air ..

deposits diamond sub-ohm equipped with a peak dropwise well, two end rings and O confines drops drops instead. You can not use here 510 or 810 drip tips. He can unscrew the end of the base wire. I love this decline, which is more comfortable than the end to sink a baby version of this tank. This drop of the ends of 16 mm, the diameter of 10 mm tip drops.

This is a top filling spray can and remove the top cover is very easy, just a half turn is necessary and that is, you can fill the tank without problems, two details recorded on the top deck of great help when you want to open the top cover. A statement from the top you can see a large hole for liquid mail, so probably will not be a problem, even with a large bottle. I think it is a very good filling.

It is equipped with a spray tank of glass bubbles, glass bubbles tanks with a capacity of 5.5 ml, which was very good. colored glass bubbles, you can see the image as it looks. Also in the package, receive a glass container, with a capacity of reservoir another ordinary glass and ordinary glass container is a letter of 4 ml of liquid, which remains a large capacity. I use the tank glass bubbles, because it seems better for me and the tank has a larger capacity. Also, if you like, you can buy a diamond tank with a tank capacity of 2 ml.

 

This deposit will receive two coils, two coils are coils networks. This winding is pre-installed DM – mesh coil, the coil resistance is 0.15ohm was recommended that the supply reel is 40-90w. Replacement coil packet receiving DM DM coil, the coil resistance is 0.15ohm, it is recommended coil power is 40-90w. Before filling the tank, it must be primed coil with few drops of liquid and, because this way Pod IJOY Jupiter will be avoided when winding starts, can fill the tank and can be used without pull away.

reservoir, can save money by RBA head coil.

atomizer is compatible with several rolls:

– X3 – C1, 0.4ohm resistor coil, the strength suggested 60-90w
– X3 – C3, six coils, the coil resistance is 0.2ohm, strength suggested 90-110w
– X3 – C2, the coil resistance of 0.3ohm, the 60-100w suggested strength
– X3 – C1S, wood pulp and cotton, the resistance of the coil 0.35ohm, the suggested style 40-80w
– X3 – Mesh, wood pulp and cotton, the resistance of the coil 0.15ohm, the suggested style 40-90w
– X3 – RBA
– DM – C2M, 0.3ohm coil resistance, the force 60-100w suggested
– DM – C1M, the resistance of the coil 0.35ohm, the suggested style 40-80w
– DM – DM, the resistance of the coil 0.15ohm, 40-90w suggested style
– DM – Mesh, the resistance of the coil 0.15ohm, the suggested style 40-90w

 

Threading a very good base, you can easily change almost reel. The tank bottom, you can see the 510 gold plated cable pin is also good here.
No flow control at the base of the ring and two air holes for ventilation. You can easily adjust the air flow, that you settle on the one hand, it will be the same on the other side.
the air flow rate is different between this version and the version baby tank more air baby diamond diamond atomizer, also controls the air flow in the ring here is softer, but still works well.
How it works? Atomizer:

Very sub-ohm single tank can easily fill, you have a very large hole, so no problems with filling and can be easily and quickly change its coil.
You can not use your suggestions here 810 and 510 drops if this could be a trap for someone, but I think it is very convenient to use and are not a problem for me. Coils worked well, no raps and fluids, the use of 70-30 pg vg e-liquid in the tank and everything is almost as good. Steam is excellent. good taste, I prefer the DM mesh coil, I think it is better to work like and want to use it, Dm dm-coil is also good, but my first thought was a little better.
RBA head also a huge advantage because you can save a lot of money.
This is a sub-ohm powerful tank with good quality construction.

 

My joy saber mod

Pod IJOY mercury is arranged tubes. the maximum output power is 100W.

Looks good, in my opinion, this model is 29 mm in bottom diameter, but above 27.5 mm in diameter is mod, but again the 25 mm inner diameter of connection, so you can use here atomizers 25 mm diameter suspended. Mod is the height of 97 mm, so it is not very large mod and for me to be here. sword IJOY is powered by a single battery, supports two types of batteries that can be used batteries 20700 here and can be used 18 650 in total, will receive a great adapter 18650 Pro is here in the package, you will receive a 20700 battery, you can use the sword when you take if you do not have a battery. It is very good that the battery in the package. the build quality is very good, he has not lost when shaken mod unless the shutter button, you can hear the trigger a little, but everything else was fine. We can see some details about the mod, a mod that you can see engraved “IJOY” top model, you can see engraved “Mei spray force be with you” under the battery cover, you can see recorded “designed by IJOY “. IJOY sword has a connector pin stainless steel and gold plated spring 510.
In the Ministry of Defense, you can see the USB port to charge and update the firmware, you can charge the battery of a mod, but I recommend using an external charger.
On the side of the mod, you can see the shutter button has a diamond shape that looks great, dislocation, but have little to play a bit when the shakes in the morning. projecting the shutter and can be easily found when taken and want VAPE am. Trigger works well every time, so far there is no loss of fire at all. plus and minus buttons are also good, the buttons are dislocation, even more than the shutter button and when the Ministry of Defense was stirred plus and minus buttons are kept.
Just below the Plus or Minus key on the screen, the screen brightness is very good and you can see everything on the screen.
In a good course of the son of the battery and you can easily change the battery. Also in the hat, you can see the detail that helps when you want to open the lid of the mod. The battery cover is a vent. A unscrewing the battery cover, you can see recorded how you need to put the battery, but the Ministry of Defense that can be seen are marked with red on replacing the battery, mod also protecting the reverse battery if make a mistake. Pin on the battery cover is spring loaded.
It is very easy to use this mod, this mod is very simple. To activate the mod should click 5 times on the fire button to turn off the Defense Ministry must click five times the shutter button. At the click 5 times to activate it, you will see the “Saber” screen and the firmware version. At the turn of the model on the screen you can see:

– Power
– The battery indicator
– against the coup
– Coil Resistance

This model VW operates and for someone who would be a scam, but for someone who is a great professional, because the arena IJOY has features that can interfere with people or someone basically how complicated everything very easy and simple.
In this mod, you can reset the counter and breathing do, you need to click 3 times on the shutter button and ask you to reset the counter breathing.
You may adjust the power of 5W – 100 W and 0.1 W when the setting button is pressed more progressive power, but if pressed button total 1 mg and gradually grow faster.

Some of protection:
– Short-circuit protection
– Low Power Protection
– Battery check

 

So iJoy saber is in my opinion a very beautiful model of the tube, which is very subjective, but I like the way it looks and the size of it, because this mod is not so much that it is very convenient to use. More recently, we could see a lot of tube mods and I really like, because it can be very useful mods tube.
Key works very solid, sensible heat and fast, used to use this 50watts. It’s great that the battery pack is 20,700 so if you do not have 20,700 batteries, which can be used. IJOY 20,700 batteries, which have some of these batteries, 21,700 and 20,700 IJOY batteries, which must be longer and the battery still works well. It is encouraging that in the package there is also an adapter to 18650 and if you wish, you can use the 18650 personally like can also be used by 21,700, but no matter, because you can always use 20700. Our battery was designed a little here my opinion and IJOY expectations appropriate with the next update, I think that when two indicator bars battery when the screen is off and spray the lack while pressing the button the shutter on the “Saber” and the firmware version and after second, you can vape, but I think it will be fixed with an update.
Build quiality as I said, very good, once again I have to mention the great benefits of the battery, this model is also very convenient to use and if you like mods configurations tubes play as well.

You can buy it here: IJOY

 

A review of various models of VOOPOO

First on the carton packaging usuall come in a sturdy plastic case with Voopoo Drag Mini logo on top and covered with a removable foam padding useful if you want to use for other things. VOOPOO PnP-VM1 Replacement

The front panel is a relatively simple way. beautiful color screen, large fire button at the top to vibrate and robust standards and lowing button on the screen.

USB connected and has a surprising side coverage gum. Allows easy loading (if that’s the way, tut tut … .. Lol fill) overprotection and edified TBH I think we have the 2Amp load for all devices based on the recent genetic chip.

 

I like 160W output as it is realistic. They are not able to write to the pressure of 200W capacitor coupled to the side.The

Battery conveniently stored in the lock lever spring base.

The menu is very similar to a base of the box x Argus. Watt is automatically limited to the maximum security for the execution of the power coil that is an excellent point and I’m glad to see this trend continue.

 

New gene chip TT has all these features (see the review will be X for details), plus the full-time tc (Yes, the plus and minus buttons to go to TC). RBA RDTA sheath or coil tc deposits will be perfect for action with a case or anything.

This has a standard connector cover 510 is a masterstroke.

 

You can use an adapter pod deposit or select the slide 510 x sheath included.

 

sheath is 4.5mls is 2 ml simple English. PNP coil is always very good for taste, but did not have this problem before filtering at the base isolation. This has increased significantly recently 0.15coil and some monkeys have told me things are improving in others. 510 adapter really helps here (again, he holds the pod through which a very strong magnet) because it does not allow the inclusion of juice mod so easy.

 

Other winners Voopo. If you love Reader X (I), you’ll love to do the same forever.

This is the first time I write a review seading and thank you gift for the celebration of the competition and send VOOPOO PnP 20 / 22.

 

 

Well, this is my last exam powerful and some animals VooPoo.

Thank you very much to the people of @VOOPOO to let me try a big team in recent years.

Here VOOPOO Drag 2 Platinum.

You get.

The case is wrapped in a cardboard box with a picture and the name of the team on the front, while the back is a list of content usuall, colors, mod, original security code, etc.

In this case, there is a change, tank, two coils, user manual, and a USB cable.

 

The first thing we noticed when you take this case mod is how light it is. (Internet is 140 grams)

and the battery cover any safety hinges, with + – of the battery in the direction of the contact.

Skin? Wieght finish combined with light makeup feels comfortable in your hand. comfort metal alloy parts are matt black with black paint splashing effect that resembles a smooth and shiny surface droplets when a light fixture, and therefore tried to clean. In the mod hidden side under the rubber stopper (to keep the pockets of fiber in your pocket and your mod) Port Type C to update the firmware, although the manual says it can be used for charging with USB cable included II always I recommend charging the correct use of external battery charging.

mod inner screen reminds me of a sports car, the pilots believed the child the name brand unification “ARGUS”.

When the mod participates for the first time in fashion and modify to customize smart as a PNP Wich coil used and watts maximum limits for coils 3 strokes clicks of movement for the RBA in which you can adjust the power of full 160W recommended three clicks mode wich temperature control support roller nickel, titanium and stainless steel. + Firefighters and lock all buttons including the shutter button, and firefighters and – button will clear the table and gasps. Press three buttons simultaneously display the chip ID and the code level?

VOOPOO NAVI is in two parts. The top is made of PCTG is the same module that uses Drag s / x and compatible with the coils PNP Voopoo are available in different strengths. Rapid filling and easily by lifting the rubber stopper at the bottom of the car and fixed at the bottom with three strong magnets. The bottom is made of stainless steel 24 mm in diameter at the base and has two slots for controlling adjustably airflow knurling very adherent on the ring Airlow control and the spindle 510 so that can be used Drag in a container or mod s / X.

I used the 45W 0.2ohm coil provided with Airlow opened completely and get a good taste and clouds production. Knowing the coil subject PNP to encourage Salí and have some small advantage when used, after standing for about 12 hours ago more benefit if it was a day very hot (30 c) and I eLiquid as water because of the heat wich can be one advantage unlucky.

Argus GT Mod:

Dimensions: 132 mm x 51 mm x 26 mm (Mod is only 51 mm x 86 mm x 26 mm)

Material: Leather + zinc alloy

Output Power: 5-160W

Output voltage: 6.4-8.4V

Resistance range: 0.1-3.0Ω

18650 requires dual (not included)

VooPoo tank PnP:

E-liquid capacity of 4.5 ml (2 ml Version TPD)

Material: Stainless steel + PCTG

Resistance: 0.2 Ohm (PnP-VM5) 0.15 Ohm (PnP-VM6)

 

content:

1 x VooPoo Argus GT Devices

1 x VooPoo PnP Tank – 4.5 ml (2 ml Version TPD)

1 x PnP-VM5 – 0.2 Ohm (40-60W)

1 x PnP-VM6 – 0.15 Ohm (60-80w)

Cable Type 1 x C

1 x Case

User Manual 1 x Warranty and

Alpha Kit Review — Anything Different From Lost Vape Orion

This seems to Smok accelerate the release of new products recently. Today we are here to examine the pod system Smok new kit – Smok Trinity Alpha kit. Before we begin, I ask that anyone here bought Orion Q vape missing or DNA pod kit yet? I’m sure you know a little more about the Lost vape Orion series. Well, you might find a reflection of the Orion kit at Trinity Alpha.

Settings:
Dimensions: 91 x 16 mm 38X
Capacity: 2 ml / 2.8 ml
Coil: North 0.6ohm coil Mesh / Mesh-North MTL coil 0.8ohm
Power: 10-25W (SOFT / NORMAL / HARD MODE)
Battery Type: Built-in 1000mAh
Input voltage: 3.3V-4.2V
output voltage: 2.4V-6V
Load current: 10.7A
load voltage DC 5V 1A
Resistance Range: 0.4-1.4ohm
Package Contents:
Smok Trinity Alpha Battery
Smok Trinity Alpha Pod vacuum (2.8 ml)
Mesh north 0.6ohm coil
North-MTL 0.8ohm coil Mesh
1 x USB cable
1 x Manual
battery design

As I said above, you will find some reflections on the Trinity vape Lost Alpha Orion series on this kit. Maybe some people like to know what kind of “what is happening with this kit” when you see this image. LOL.

So you can find this kit so glittery and shiny under the light. colors of the rainbow is always a choice of traditional color in the pod kit. On each side of the design of the battery to provide a shaped resin touching feeling smooth. But I’m a little scared so easy to leave fingerprints on the surface and the intermediate metal frame. The truth is that all I’m afraid. On the other hand, the appearance colorful and glossy and soft pretty obvious. Now keep in mind that this does not leave a scratch on this kit.

large fire buttons offer more comfort in cooperation. Compare with Lost Orion vape, no power mode function on this trinity alpha kit with single button press together. Disk Mode / Normal / you can choose to use soft. And the corresponding power is 10W-25W.

Meanwhile, there is a security protection to the position of platforms – lock button on the pod cartridge. Unlike the magnetic connection design on the most pod kit, but it is the same as the Lost vape Orion series. Provide special locking button vaping safer if you have a baby that is still being played around you when you vaping. Personally, I would name the baby proof locks.

 

design Pod

 

Pod cartridge also comes with a special design in a way. filling filling pull-then-hole brand becomes easier. Compare with the design of the screw Lost vape Orion port, pull light switch and charging on alpha trinity simpler and more efficient. And you can also see the air hole in the charging port next pods.

coil design is inherited from Smok north, which means Trinity alpha pod compatible with Smok North rollers. North north of the mesh coil of 0.6ohm and 0.8ohm nets MTL coil included in the package for a range of vaping experience and needs.

With the great success that the Smok kit was done, there will be more of the same coil design kit Smok gondola in the future. Well, you can see this coil design in a box kit – kit Morph 219. Check this kit here, you may find of interest.

Compare with Lost Orion vape?

Honestly, the breakthrough and innovation is what we see in the market vaping. Of course, we need to mature technologies in the kit vaping instead of semi-finished products. The absence of Orion vape, vape all the happiest love to see a pod unique design of this kit. For now, Smok try to learn and reproduce this kind of pod formation. Meanwhile, they also make their own adjustments and changes in one pod kit becomes easier to use. People can not understand why Smok take the path of reproduction because they really have the ability to create and innovate. I do not know either. But we, the fans and vape users, where there is a change, we welcome and support.

Decision

Leave aside in the same general design, Smok trinity alpha pod kit kit is without doubt brilliant. Ensure the design of the special representative coil and excellent performance in this kit. By the way, do not forget the built-in 1000mAh battery. Because you can spend more than a time of day vaping. Honestly, I hope will be adopted design of traction and filling on a more human and more pod kit. Believe me, you want to try again after the silicone port connector you use the trinity of Alpha Smok kit.

Of course, I would recommend this kit Smok Trinity Alpha.

Here: Smok Trinity Alpha Starter Kit 1000mAh

 

Thanks for reading!

Augvape Intake Sub-Ohm Tank

Hello,

 

Today I Augvape intake tank for inspection, a collaboration between MikeVapes and Augvape. MikeVapes is my favorite so critical on YouTube so my expectations are high on this one.

Many may know RTA admission, earlier taking the series. The particularity of this tank is Clapton mesh metal tape used in the coil, Augvape claim GDR like aroma. We’ll see!

 

In the box:

 

– tank intake Narada Pro Pod System VW Starter Kit

– 1 * Glass Bubble

– 1 * 0.15 ohm regular coil Mesh

– 2 * Mesh Coil Clapton

– 2 * O-rings

– 1 * User Manual

– 1 * Warranty Card

ILike that you get three coils in the kit, do not remember everything I owned tanker which has three coils in the kit. Coils, but not packed or sealed and have a visible fingerprints on them, Augvape hope that the kit will improve the future.

 

Review:

 

This beautiful container with zero brand outside of the tank, right at the bottom. I like simple search tank and that’s what it is. Carved into the “A” over the entire tank provides the right grip for each part. Overall this machine is well done and if the quality of feeling, this tank was the strongest of all the tanks SubOhm I submitted so far, and I have great hands.

Even if the tank is much better with the right lenses; glass bubbles have only a higher capacity (3.5 vs 5 ml) are important for the tank. 5ml is a kind of standard
It is easy to disassemble the entire tank to replace rolls and cleaning purposes. As the rings also come from the airflow. One thing I was struggling a bit with the tap of a coil with empty hands, too bad they do not understand the coil removal tool to make it a little easier. The coils installed easily.

Top fills easily with 90 degree locking key mechanism, as I like the SubOhm tank. Top hat offers a good grip for easy opening. It is recessed seat for the rubber stoppers are inserted into the filling hole, which ensures a good seal.

The air flow allows a lot of air, and for a beautiful limited edition. I must say that the noise of the air flow is very smooth and quiet enough for this type of tank. ring airflow moves with ease and because the peak engraved on the “A” is very easy to get good adhesion.

There is only one point drop in the kit, but it is a right dot net. In the minimum cap position because it is too short.

Let us now talk performance. I started with a wire mesh Clapton, just because it is marketed as an innovative taste and upscale. Admittedly, the taste is amazing on this coil, and what I like even more is the fact that it is probably a little warmer than usual coil Mesh, perhaps because of the design Clapton. The sense level GDR? I would say yes, at least very close. The difference with the GDR, however, is that you do not need to buy a Rolls-drop and if the performance you just fall leaves replace cotton. But for those looking for a taste of SubOhm tank with falling rolls is a good choice.

Another coil Mesh is what you expect of a mesh coil, provides a good flavor and a dense cloud. If I had to choose between the two coils, it will mesh metal Clapton, the only truly revolutionary in my opinion. In the Netherlands, we would say “A knock on the Bullseye” and I think the technology is appropriate mesh Clapton by many companies soon, it was good.
Two coils have no problems with chain vaping all, very saturated axis unabated. I’ll have some condensation buildup by high velocity air, overtime, slightly below the ring moisty flow of air,

Conclusion:

Looking for a drop tank SubOhm coil with a fantastic flavor? Then this may be your best option right now. Mesh is really great Clapton. I highly recommend this SubOhm tank, but keep in mind, it is my opinion

If there is a downside to mention that it would be difficult to take a roll with his bare hands, and the fact that the coils do not come sealed and a little dirty.
One good thing about this tank is the price, you can get them from various sites for under $ 20 and you get three coils inside the box!

Thank you for reading, take care!
Sjoerd

Voopoo Vape Integrated Battery

NAVI MOD POD

Voopoo technical systems in millions of colors, seven colors available for your choice: paint, black, ink, red blue silk mesh blue, purple and carbon fiber. Voopoo spray kit is powered by a Voopoo Vape integrated battery and maximum results can not be less than 40W.

Inhalation of air flow products, breath control and breathing air independent and configurable user: Voopoo Vinci X have my  three innovative airflow for me! Covering rechargeable hand – size 3.8 ml of the basic capabilities of your vaping experience. In addition, this software is equipped with a sliding NAVI kit box Mini Voopoo two coils and spray the sliding fur PnP MV4 series. Secondly, it will bring the best experience of the delicate flavor and thick clouds.

Voopoo Drag Kit Starter Kit What’more NAVI overcome this sensitivity is unprecedented and the force of the blast, with independent innovation air ducts, air inlet NAVI mode is enough to bring a lot of makeup air and subvert special knowledge. And perhaps without sliding friction smart playlist VW Voopoo X coils have cake and other functions. For additional security, the protection of seven to support: Voopoo Drag X Revenger against overload circuits, maximum power protection – protect against over-voltage protection diacharge and over – temperature protection. In short, a fantastic and very nice, just be happy and enjoy vaping all day.

Voopoo Vape Kit Flow

Voopoo Vinci adopted a new chip with integrated 1500mAh battery to support the automatic and manual modes to meet your different needs. It also comes with a practical capacity and juice 3.8 ml / 2 ml (HAP) at the mouth of fine droplets. Moreover, the adoption of innovation Voopoo Vape Kit flow with three patented pneumatic air to breathe independently. In addition to functions that support all mesh coil cloud platinum coil bobbins Voopoo Voopoo obtain a very good taste and rich.

Voopoo Navi

Voopoo Drag 2 Mini Mod is an ultra portable speaker system with the power of traditional mod box. FETCH MINI kit is equipped with a battery connection and dust resistant design POD 1200mAh oil compatible with the RPM and northern families.Featuring details coil elegant glass, body color, the internal battery Voopoo Slide X Pod 1200mAh variable capacity power 40W and 5W. Swipe Voopoo Drag Specs data for vaping and the shutter button and two buttons feel perfect compact and ergonomic. Voopoo Drag 2 is available in two configurations and the magnetic characteristics of the connection.

Drag Voopoo Vape Mini Trail

Drag Voopoo vape mini trail is a portable device that takes advantage of the ultra-mod innovative area and boat and combine them into a single unit. Powered by the new Voopoo Vinci RBA is a need vaping and supports an integrated manual or automatic loading system Voopoo Vinci. In manual mode, you can adjust the output power switch kit Pod Voopoo system. Innovative blow to monitor and record their usual two weeks vaping. TFT color screen of 0.96 inches lets you see all the statistics that the battery of the evaporator, the shock and fashion / watt, etc.

Voopoo Drag 2 Platinum is a portable kit that combines the advantages of the device and the nacelle housing mods. Cube-shaped and covered with features and light equipment. It is small, but equipped Voopoo specifications Slide vaping integrated battery the price for the Voopoo Coils. the output range of 40 W, product Voopoo Vinci coils adjusted to match the style vaping – 1.

VOOPOO Drag X VW Pod Mod Kit 80W

Voopoo Vinci coils of the tank eLiquid

What is the first to say that if the burning desire evaporator. It happens to everyone and easy to fix. A fire pit kit Voopoo vape dry and cured when heated. Voopoo Vinci coils of the evaporator tank eLiquid. eliquid axis remains before it is converted to steam when the coil is heated. If the tree is not completely saturated with eLiquid when a breath is taken, this material can have a bad taste in your mouth and allow prices to burn.

All batteries, but that occur ultimately different vapers instance at different speeds. Multiple users can edit each week, while others need to replace coils once a month, the weight of the package. This varies from one device to another, but we hope that the future role of the freezer for about two to three weeks. After burnt coil, not much you can get an idea unless changes solve coils. However, there are some things that prolong their lives. Four learn all the features, but many new burn vapers Voopoo Vinci RBA they do not know how to protect themselves. In this case, this new guide is compared vapers solved with less sophisticated equipment. But he did teach vapers do not know one or two things at once. Learning how to save you money on the features and the best flavors of each stroke of the evaporator.

If you put in a new role and get a burning sensation that can be caused by a cord when a hit with the course from the rest evaporate just taken. This is probably the most common cause of burns to the coil, especially for new vapers. Most of the evaporator Vapers at a time of application. Even experienced vapers box with the ignition key when the sheet into small doors Voopoo Drag Starter Kit sliding are very useful. Vaping chain waves is the coil is not damaged enough time to learn more eLiquid to absorb between trains. This leads to dry and wick.

Why does my vape taste burnt?

Stop burn linking the volatile voice. You can rest only 15 or 20 seconds between each race. In practice, however, it is often more difficult than that. Most Vapers, especially new vapers, were former smokers and have the habit of taking many small strokes as they would with a cigarette. Many vapers vaping nicotine addiction and can help want answers to these chains. If the chain vapor nicotine addiction to satisfy, try greater resistance to nicotine Voopoo Drag Software. You can choose from the evaporator, go to the juice, as they are a satisfactory neck along many former smokers, can offer a high DP. You can also slow down and evaporator hit go in the pocket to avoid the temptation to accept.

If the chain does not vaping pulled Voopoo Coils. It takes a little later discharged with the Blitz, but do not wait until the juices seep into the pen. Older products and not for new users recommended. You can buy two different devices and rings.