Vaping is a great way to get your own nicotine fix, without having the side effects associated with smoking. The electronic cigarette, also known as an e cigar, or an electronic cigarette, as it is sometimes called, releases a chemical reaction when nicotine and other chemicals are present. These chemicals in an e cigarette are commonly referred to as vapor, because they leave a sticky chemical residue on the outer coating of the cigarette when they are burned.
Vape coils are typically used in conjunction with an electric vaporizer, to heat up your e-cigarette juice and produce vapor. Atomizers, as they are commonly called, are relatively easy in design – generally consisting of only a wick surrounded by a complexly complex metal coil which absorbs the e-juice. Once the wick is lit, the coil heats up, releasing the vapor into the air. A typical electronic cigarette, when used in combination with a Vape Coil Cleaner, will produce a burnt taste in your mouth and throat, this is due to the chemical components in your Vape Coil.
Most vapers are interested in using their devices to eliminate their nicotine cravings, but many are curious about the after taste of their finished product. Many experienced vapers can detect a burnt taste in their mouth immediately after the device has been run. This is usually caused by the coils being cleaned, but many new users do not notice any change in their overall taste. Some experienced vapers claim to have experienced a drastic shift in flavour upon switching to a new coil type. Other vapers may not notice any change at all. It is important to note that all of these are subjective opinions; the only sure way to measure if a particular brand changes the flavour of your Vapes is by trying it yourself.
One way to ensure you do not experience a drastic change after cleaning the coils is by gently removing the used oil from your old tank. Many times a used coil will have built up a little bit of residue on the walls of the tank. If this is the case, gently pull the coil out of the tank. You can either unscrew the cover of the tank with a pair of pliers, or if you prefer you can purchase an inexpensive syringe to accomplish this task.
After you have removed the used oil from your device, it is time to move on to cleanse your coil. The most convenient way to cleanse the coil, and the best way to ensure there is no build up of chemicals on the coil walls, is to use an atomizer cartridge. These cartridges are very convenient because all you need to do is put the atomizer in the tank, fill with water, push the button to insert the cartridge and then push the button to release the atomizer. Once you have completed this step, insert the used oil into the tank. You must be sure to keep the coil entirely submerged in the water.
Once your coil has been submerged in the water for at least five minutes, remove the cartridge, wipe the oil off with a piece of cotton and re-insert the ohmmeter probe into the ohm meter connector on the top of the coil. If you have an alarm clock, simply read the ohmmeter to make sure the coils are currently showing accurate readings. If this does not provide the desired result, replace the ohmmeter with a brand new one. Do not try to force the ohmmeter up into the coil as it can cause damage to the meter.
Once you have performed all of these steps, it is time to place the used oil into the bottom of your new bottle. With the new juice cartridge in hand, gently mix the juice with your hand or a small kitchen spoon to create a smooth consistency. By taking the time to perform this simple step, you will ensure the optimum cleaning process for your new or juice. Once the mixture is completely blended, allow it to stand for approximately thirty seconds and then squeeze out all of the juice from inside the bottle.
After your new e juice has sat for the allotted period of time, remove the paper towel from inside the glass tank. Once the paper towel has been removed, place the glass into the microwave oven on the lowest temperature setting and heat the glass until it is fully hot. Once the glass is heated, wrap it with a piece of fine kitchen foil. When the oil is hot, place it over the glass and cover it with the rest of your paper towel. Heat the oil for a few more seconds, until the foil begins to turn from white to black.