Review with smok tanks nord2 RPM 80 mag griptrinity alpha nfix pods

I have a vapeciga smok nord2 pods cabins health for the purposes of this review.

Smok g PRIV three colors:

– chromium PRISM
– Black
– red
– Gold Prism

Smok-g mod interlocking 3 specification

– Size: 54 x 28 x 85 mm
– Chip: IQ-G chipset
– Operation: VW (standard soft, hard, Max) / TC (NI, IT, SS, TCR, heat) / Mode I
– Range Power: 1 W-230W (VW) / 10-230W (TC)
– Input voltage: 6.4V 8.4V-
– Output voltage: 0.5V-8.2V
– Battery: two 18650 cells
– Cooking time: 0.001s
– charging port: Type C
– Charging voltage: 5V
– Charging Current: 2.0A
– Standby current: <400uA
– Resistance Range: 0.1ohm-2.5ohm (VW) / 0.05ohm-2.0ohm (TC)
– Temperature: 200 ° F-600 ° F / 100 ° C-315 ° C
– Display: 2.4 inch touch screen

Smok tank tfv16 Lite Specifications:

– Size: 24 x 58.5mm
– capacity: 5 ml
– Filling: Top charging system
– Material: Stainless steel
– Coils: conical coil Lite Mesh TFV16 better: 60-75W; TFV16 Lite mesh 0.15ohm dual voice coil, better: 60-90W
– Re: gold plated wire 510

Vapeciga SMOK RPM 80 Pro lite 16 is 24 mm in diameter and 58.5mm high this atomizer. With the atomizer is in the package, you will receive two tanks bubbles and receives two coils.

atomizer build quality is good, the wire is smooth and everything is as it should be. Previous you can see atomizer “Smok” and the bottom of the atomizer can see the “Designed by Smok”.

The spray is Smok use drops and splashes of the nozzle is pre-installed standard does not support plates 510 or 810 drops would be a disadvantage for some people. The leak is acceptable to use in my opinion.

This is the burden of the atomizer and the atomizer can see the push buttons on the top deck. So when a button is pressed, you can push the envelope and see the fill hole. Fill a large void and have no problems to fill the tank. No leakage when the tank is filled.

This spray tank is equipped with glass bubbles and pre-installed bubbles will receive a glass tank replacement. Capacity glass tank with a capacity of 5 ml of large bubbles in my opinion. If desired, you can buy in the release of the atomizer 2 ml. I liked the glass bubble and I like the ability.

With the atomizer, you receive two coils. A coil is pre-installed, and the other is in the box. tfv16 integrated coil bobbins Lite mesh and works best cone 60-75w, the coil resistance is 0.2ohm. receiver coils in the package is a dual coil tfv16 net Lite and has the best strength and work 0.15ohm 60-90w. Actually, it can easily replace the coil atomizer need is outside the coil and a pulse in another, very simple and easy. In the coil, you can see the engraved lines so you can tell when to fill the tank, which is good. It is used first coil first drops of liquid E should and can put a coil in the tank and filling the tank.

In the air flow control dial, you can see that the air flow in both places. In the air flow control dial, you can see some details that helps adjust the air flow and how much will be adjusted, will be the same on the other. You can easily adjust the airflow into the atomizer.

How does it work? And my mind atomizer:

Atomizer build quiality I received was very good, everything worked fine and the correct cable. With the atomizer, you receive two rollers and two glass bubble tanks were really good in my opinion. smok mag grip show new also receive a standard preinstalled drops and the spray nozzle is not compatible with the advice 510 or 810 drops would be an idiot.

Top filling with good and had no problems whatsoever, fill a large gap and can fill up quickly and easily. Capacity is very good in my opinion and I think a lot of capacity will 5ml. Using the spray, which received two rollers, one coil and other network dual bobbin thread. I tried the coil mesh and decent work, good taste, but I like the coil tank Tf better, and also provide a good flavor and excellent vapor production, this powerful steam. Given all very busy aerosol that can be treated.

weakness:

– It is compatible with the 510 or 810 drip tips

Pro:

– The build quality is good
– facilitate the charging system
– capacity 5 ml
– Two glass bubble tanks
– Two coils
– The good taste
– dense vapor and steam production
– Easy to replace the coil
– Easy to adjust the flow of air

Smok g priv 3 mod:

3 mod Smok g priv ate two 18650 and the object of this mod 1-230w formed. Mod dimensions of 54 mm x 28 mm x 85 mm. mod construction quality is very good and no complaints. I really like the design of mod, modern look very nice in my opinion, and you can buy this mod in 4 different colors. Mod does not have sharp edges and mod is very comfortable to use. You can also see some details about the mod, mod before, you can see “Smok” and behind the mod, you can see the “G-3 PRIV” with little information.

On the upper side of the mod, you can see the connecting thread here is good and I had no problem pin, silver and gold spring. this mod, you can use up to 25 mm diameter without false atomizers.

On the rear side of the smok trinity alpha tank click in, you can see the battery cover and, as said this device is powered by two batteries 18650. The remains of the battery cover in place because the magnet and remains well in instead there is nothing to play which is very good

At the bottom of the deck, you can see a small slot so you can pull nails. If the battery cover is removed, you can see the orientation of the battery in painting and also have a band here so you can make simple battery. When the battery is inserted into the mod and mod when it is not very good Sizzling stir.

Sub mod can see the ventilation slots and USB port c.
You can use the USB port for software updates and can be used to recharge the battery to charge additional device is balanced. As usual, I recommend recharge your batteries in an external charger.

On one side of the mod, you can see the shutter button. the shutter button on the device is very large and dislocation, which works very well. I like the shutter button and I think it is very convenient to use. At the top of the shutter button, you can see another button is used to turn on / off the screen and lock / unlock the screen.

On the front you can see the touch screen mod really, really big screen, 2.4inch screen size. I think this is a beautiful screen and the screen brightness is good.

To activate it you must press the shutter button 5 times and must do the same to turn it off. When the power supply mode activated will appear on the screen:

– I can not
– locking / unlocking
– The battery indicator
– hot
– W
– Time hojaldre
– Left and right
– coil resistance
– V
– blow

Thus, on the screen, we have all the necessary information and this is a big high definition screen with good brightness, because you can see everything that is good on the screen. The touch screen works very well and had no problems so far.

How do these devices work and my thoughts:

Get code smok nfix pods is my opinion that another mod is very nice with Smok. mod build quality is very good and everything is as it should be, feels very solid in the hand model.

Mod does not have sharp edges and easy to use, in my opinion. I like the shutter button and in my opinion, the trigger is very comfortable to use, works well for this moment. This model can be used up to 25 mm in diameter without false atomizers. This mod is a fingerprint magnet would be a disadvantage for some people. Mod USB port and support cost balance c much want, but as usual, I recommend using an external charger. Here the screen is very good, is the size of 2.4-inch touch screen display and it works very well, I have not had any problems so far. The screen brightness is also very nice and the screen, we have a lot of information. We also have some interesting options here, we have the access code and can choose the color on the screen.
On top of the shutter button, there is a button that allows you to lock / unlock the screen and turn on / off screen. The battery cover is still perfectly in place and no play here, which is very good.
Mod is now well and had no problems with this mod.
I really like this mod and mod works most of the time with no problems so far, so I can recommend this mod if you want to buy a touch screen mod.

weakness:

– fingerprint magnet

Pro:

– The quality of good mod construction
– I like the design model
– comfortable to use
– button located above the shutter button
– I like the shutter button
– The screen is a 2.4 inch HD touch
– Good display brightness
– Much of the information on the screen
– Easy to use
– The touch screen works well
– You can change the colors on the screen
– Balancing the load
– Battey makes the perfect cover in place
– My selection method
– Access codes
– No ring
– tape so you can easily remove the battery

You can buy here: smok tanks  https://www.vapeciga.com/collections/smok

sourcemore thanks

 

Leave a Reply

Your email address will not be published. Required fields are marked *